|
KOMPaion VEA-Line
Application
The ion exchanger plants of the KOMPaion-VEALine
are used for the generation of demineralised
water .This is one of the application of the versatile
separation process of ion exchange.
Other kinds of application:
- Polishing filtration
- Metal recovery
- Loop recycling of rinse water
Filtration is a basic requirement for all ion
exchange applications. Oil and grease must also
kept out of the system; when present, they are
typically removed by prior micro- or ultrafiltration.
Any particulate matter or products of hydrolysis are
retained by prefiltration in multi-media or cardridge
filters.
Process Characteristics
The proper selection of ion exchange resins is of
importance. Most ion exchange resins in use today
are synthetic organic materials made up of macroporous
matrix which are able to adsorb ionized
substances in solution and release them again in
concentrated form during regeneration phase.
The ion exchange resins are filled into fibreglass
laminated columns. The feed stream is pumped
through the resin bed in up-flow mode.
| Type |
VEA
2-15 |
VEA
4-25 |
VEA
6-32 |
VEA
9-40 |
VEA
12-40 |
VEA
15-50 |
KIA
18-50 |
KIA
24-65 |
KIA
30-65 |
| Flow ca. m3/hr |
2 |
4 |
6 |
9 |
12 |
15 |
18 |
24 |
30 |
| No. of cartridge- or
sandfilter |
1 |
1 |
1 |
1 |
1 |
1 |
2 |
2 |
2 |
| No. of lines |
1 |
1 |
2 |
2 |
2 |
2 |
2 |
2 |
2 |
| Material of piping |
PVC or PPH |
| Length ca. mm |
1200 |
1200 |
1500 |
6000 |
6500 |
7000 |
8700 |
9900 |
115000 |
| Width ca. mm |
800 |
1000 |
1300 |
1400 |
1500 |
1600 |
1700 |
1900 |
2100 |
| Height ca. mm |
2000 |
2000 |
2000 |
2200 |
2200 |
2200 |
2400 |
2400 |
2400 |
Length, width and height without the necessary clean water tank.
Description of plant
The plants of the KOMPaion-VEA-Line includes the following assembly groups.
- Prefiltration (single- or double cartridge filter)
- Selective ion exchange columns
At the ionexchange plants of the KOMPaion-VEA-Line the advantages of the series train configuration are used,
considering the exchanger capacities.
The operation of the plant is divided in following main steps:
- Running: Removal of ions of the city water
- Regeneration: Activation of the active exchange groups with acid or caustic
Advantages
- High quality of the clean water through the retention of the
potassium leakage
- Safe starting of the automatic regeneration
- Low invest cost by simple construction of the tube battery
- Modern control concept at central PLC unit
- Low operating expense
- Especially clear and dead room
free tube battery
- Patented regeneration system
|
|
German
Contact
Print page
Data sheet KOMPaion VEA-Line